Sudershan Measuring & Engineering (P) Limited.
English    Espanol    Francais    Deutech
Sudershan Measuring & Engineering (P) Limited. Sudershan Measuring & Engineering (P) Limited. Sudershan Measuring & Engineering (P) Limited. Sudershan Measuring & Engineering (P) Limited.
Sudershan Measuring & Engineering (P) Limited.
Sudershan Measuring & Engineering (P) Limited.
Sudershan Measuring & Engineering (P) Limited.
Home » Our Products » Measuring Instruments » Bore and Groove Measurement

Bore and Groove Measurement


Bore Gauge
Application :
Is a Dial indicator type gauge that will measure a range of holes directly. The tool consists of
  • A range of interchangeable anvil pieces (for the telescopic part of the gauge) that transfer their movement to a freely moving rod.
  • A body that includes a transfer mechanism (the movable rod)
  • A dial indicator mounted at the remote end (to measure the axial movement of the rod)

This combination allows the bore size to be accurately read from the instrument with the minimum of effort. The fixed end of the anvil piece has pressure fingers on either side of it that assist correct placement in the bore, this reduces the reliance on feel by the operator, as required when using the telescopic gauge.

Product Details :
  • Inserting interchangable type anvils (Above 35mm)
  • Ceramic Point anvils which are wear resistant are also available
  • Digimatic Indicator Also Available
  • With Dial Gauge Protection cover
  • Bore Gauge with 1µ Lease count also available
Size in mm Least Count in mm
6-10 0.01 / 0.001
10-18.5 0.01/ 0.001
18-35 0.01/0.001
35-60 0.01/0.001
50-160 0.01/0.001
160-250 0.01/0.001
250-400 0.01/0.001

Pin Gauge
Application :
  • Check Distance between holes
  • Checking Hole and depth sizes
  • Go & no go gauging
  • Setting Micrometer

Technical Details :
  • Eccentricity 0.002mm
  • Made of hardened steel
  • Least count : 0.01 and 0.02mm
  • Avialable Sizes 0.30 to 10mm
Size in mm Step of :
0.50 -1.00 0.01
0.30-1.00 0.01
1.00-2.00 0.01
2.00-3.00 0.01
3.00-4.00 0.01
4.00-5.00 0.01
5.00-6.00 0.01
6.00-7.00 0.01
1.00-3.00 0.02
3.00-5.00 0.02
5.00-7.00 0.02
7.00-9.00 0.02
Sudershan Measuring & Engineering (P) Limited.

External Groove Dial Caliper
Application :
  • Used to check external groove on the shaft and other hard to reach places
  • Can be used to measure pipe thickness or thickess of any curved surface
  • Long arm helps to check thickness away from the edge

Technical Details :
  • Range 0-24mm
  • Throat depth 60mm
  • Least count 0.02mm
  • Contact tip radius 0.5mm
Size in mm Least Count
5-25mm 0.01mm
10-30mm 0.01mm
10-30mm 0.025mm
30-50mm 0.01mm
40-60mm 0.01mm

Internal Groove Dial Caliper
Application :
  • Used to check internal groove on the shaft and other hard to reach places

Technical Details :
  • Least count 0.02/0.01mm
  • Arm length 80mm
  • Tip radius 0.80mm
Size in mm Least Count
5-25mm 0.01mm
10-30mm 0.01mm
10-30mm 0.025mm
30-50mm 0.01mm
40-60mm 0.01mm
Sudershan Measuring & Engineering (P) Limited.

Inside Groove Vernier Caliper
Application :
  • Used to check internal groove on the shaft and other hard to reach places

Technical Details :
  • Digital display for easier view
  • Least count 0.01mm
  • Stianless steel slides
  • With data output port
  • Size 0-150, 0-200, 0-300mm
  • Mechanical version also available
Size in mm Least Count
5-25mm 0.01mm
10-30mm 0.01mm
10-30mm 0.025mm
30-50mm 0.01mm
40-60mm 0.01mm
Sudershan Measuring & Engineering (P) Limited.